HORNVALLMO
This pleated blind can be mounted in any way to block out light from the moon, sun or street lamps. Pull from top to bottom or from bottom to top – or just cover a section in the middle of the window
Features
Key features
Suitable for rooftop windows, tilt windows and turn windows. Can be cut to desired width. The blind can be cut and re-cut to fit a smaller window. Ensure that you do not exceed maximum cut length. Drill-free mounting using the 4 included brackets with adhesive tape. The adhesive has been tested and approved for smooth glass surfaces. The assembly instructions include a table with numbers corresponding to those on the fabric and rails to facilitate precise measuring and cutting. The rails at the top and bottom allow you to mount the pleated blind precisely, covering any gap. Easy to maneuver using either of the plastic handles at the top or bottom. Depending on your needs, you can pull the blind from the top down or from the bottom up. You can also adjust the blind so it only covers a section in the middle. Block-out blinds blocks light from shining through and completely darkens your room.
Designer
Good to know
For window frames or surfaces not recommended for the adhesive, mount the brackets with screws using a drill or screwdriver. The brackets are prepared with small holes for this purpose.
To reposition or reuse on another window, remove adhesive-mounted brackets with plastic hand scraper.
For door windows or windows taller than 51⅛", mount 2 pleated blinds to cover the whole surface.
Suitable for rooftop windows, tilt windows and turn windows.
The top rail of the 23⅝ in wide, the blind can be cut max. 15¾ in.
If you need to adapt the dimensions of the pleated blind to your window, cut the top/bottom rails and the rods with a metal saw. Cut the fabric with a safety knife.
The included tool makes it easier to get straight, accurate lines when adapting the size of your rail/rod/fabric. It also protects your fingers.
For a smooth, friction-free glide, apply a few drops of silicone spray lubricant to the lock mechanism in the brackets. Ensure the spray is suitable for plastic and metal.
To suit your style and needs, we have a wide variety of roller blinds, venetian blinds, roman blinds, cellular blinds as well as pleated blinds that you can pull from top to bottom or from bottom to top. We also have smart/wireless blinds. All our blinds are either cordless or have cords embedded into the design to ensure no dangling loops and safe use by all ages.
HORNVALLMO comes as black-out or light filtering pleated blinds. They can be mounted in many ways to create privacy or the perfect ambience. Pull from top to bottom, or from bottom to top – or just cover a section in the middle of the window. Can be cut to fit different window types/sizes. Attaches firmly to glass surfaces with adhesive tape. For window frames or surfaces other than glass, mount the brackets with screws using drill or screwdriver.
Package size & weight.
Do you take it home? Make sure it fits in your vehicle.
| Length: | 132 cm |
|---|---|
| Width: | 9 cm |
| Height: | 3 cm |
| Weight Gross: | 0,87 kg |
| Weight Net: | 0,68 kg |
| Volume per package: | 3,2 l |
Care instructions
Do not wash. Do not bleach. Do not tumble dry. Do not iron. Do not dry clean. Wipe clean with a dry cloth.
Assembly instructions
Only the latest versions of these documents are available for download. This means that there may sometimes be differences between the documents you download and the versions that come with the product.